2020-08-27

Common Types Of Plastic Mold Products

As a general material, the output is large, the price is low, the performance is general, the manufacturer is many.The general plastics can be modified by adding stabilizer, glass fiber and other materials to enhance the application perform

2020-08-27

Injection Moulds @ Focus On Design And Management

Whether in the design of injection mold or management are we very concerned about the problem, then how to design and management of injection mold? The injection mold should have a reasonable shrinkage rate.Plastic mold processing need to p

2020-08-27

What Are The Standards For Injection Molding Processes?

Injection molding process generally includes: filling, pressure protection, cooling, release and other 4 stages, these 4 injection molding process stagedirects directly determine the molding quality of the product, and these 4 injection mol

2020-08-27

Solve The Problem Of Concave Surface Of Two-color Mold

1. When the depression appears in the last cooling position of the thick wall product, or in a position far from the gate: Cause analysis: Usually the typical thick wall and distant surface depression or cavity, usually due to the effective

2020-08-27

Changes In Injection Mold Design

In the design of injection mold in the past, most are based on the knowledge and experience of mold designers, the type of pouring system and the size of the structure, the reasonable design can only be based on the test results stop evalua

2020-08-27

How Much Does Moisture Affect Plastic Products

All resins must be dried before processing to reduce their moisture content;Otherwise, during the processing process, the molecular chain of the resin will break due to the influence of moisture, and their physical properties will decline s

  • 16条记录